To add your EV, tap the "+ New Device" button in the Voltello App. You'll then be able to follow the instructions to configure your EV and OCPP-compliant charger identifier, which we refer to as your 'Charge Point ID'. For some chargers, this will be the serial number.
Your charger needs to be configured with the Voltello OCPP URL: wss://ocpp.vecddevau1.village.energy
If your charger doesn't automatically append the Charge Point ID (or serial number), please add it in the URL field: wss://ocpp.vecddevau1.village.energy/<myChargePointId> where '<myChargePointId>' is the actual charge point ID, for example the full ULR may look like wss://ocpp.vecddevau1.village.energy/12345678 (assuming your charge point ID or serial number is 12345678)
After you've added an EV, you can set up your EV automation.
-----------------------------------
Fronius WattPilot instructions:
To configure OCPP (Open Charge Point Protocol) on your Fronius WattPilot, open the Solar.wattpilot app, go to the Internet tab, select OCPP, and toggle OCPP 1.6J to ON. Enter the OCPP server address provided by your network provider or energy management system, and configure the phase assignment settings.
Detailed Setup Steps
- Access the Wattpilot App: Ensure your Fronius WattPilot is connected to your local Wi-Fi network and that you have the latest version of the
Solar.wattpilot app. - Navigate to Internet Settings: Open the app and locate the Internet menu/tab.
Configure OCPP:
- Click on the OCPP menu.
- Toggle the OCPP 1.6J option to ON.
- Enter the OCPP server address for Voltello: wss://ocpp.vecddevau1.village.energy
- Finalise: Save the settings. Wait a few minutes for the charging station to establish a connection with the Voltello cloud environment.