How do I enable Modbus on my iStore Inverter?

How do I enable Modbus on my iStore Inverter?


To enable MODBUS communication via HiSolar (iStore WLAN dongle required):
  1. Open HiSolar Application
  2. Select SET
  3. Select Dongle parameter settings
  4. Select Modbus TCP
  5. Select enabled (unrestricted)
Once settings are completed, select finish and disconnect from inverter Wi-Fi access point.

You may require an installer password to access these settings. Please contact your installer for assistance with enabling Modbus for your iStore Inverter. 


    • Related Articles

    • How do I enable Modbus TCP on my Fronius Inverter?

      For GEN24 Inverters, please see: How do I enable Modbus on my Fronius GEN24? How-To Video: Connecting to the Fronius SnapINverter (Datamanager) user interface You will need to complete these steps for each inverter if you have multiple. 1. Connect to ...
    • My Inverter(s) are not curtailing as expected, or the readings aren't looking right.

      If your inverter, meter or other devices are not matching the readings you’re seeing in other linked services and you suspect they are incorrect, or if your curtailment is not working as suspected, here are some common troubleshooting tips to fix ...
    • How do I enable Modbus on my Huawei inverter?

      This link below provides instructions and will guide you through the steps for enabling Modbus on your Huawei inverter. https://forum.huawei.com/enterprise/en/modbus-tcp-guide/thread/667250677153415168-667213868771979264 Please also see the attached ...
    • How do I enable Modbus TCP on my SMA inverter?

      Preparation Checklist A smart device with WiFi capability such as Smartphone, Tablet or Laptop In the following instructions, we assume the inverter has already been commissioned Make sure you have the inverter's serial number and WPA2-PSK password ...
    • How do I enable Modbus on my Solis inverter?

      The models S6-EH1P(3-6)K-L-AU, S6-EH1P(3-8)K-L-PLUS-AU, and S6-EH3P(5-10)K-H-AU ship with the "S2-WL-ST" logger. Other Solis inverters require an S2-WL-ST logger for Modbus-TCP capability. Your installer would likely have set up your logger already. ...