How do I manually control my Battery?

When you've added your battery and selected your plan, you'll be able to open the controls for your battery.

You can set the following:

1. Toggle on/off charging,

2. Toggle on/off forced discharge,

3. Set the power input/output of the battery,

4. Toggle on/off Self Consumption Mode (SCM).

If you toggle 'Charging' ON while 'Discharging' is ON, the 'Discharging' will automatically be turned off, and vice versa. This also applies to the 'SCM' toggle. 
Toggling OFF charging or discharging puts the battery into Self Consumption Mode (SCM).
Toggling OFF Self Consumption Mode (SCM) puts the battery into 'Idle' mode.

Remember to disable your Battery for Amber automation when you are using manual control!

Your Battery for Amber automation runs every 5 minutes and sends new commands to your battery each time. This means your manual control will be overridden in the next 5 minute action if you leave your plan 'Active'.

Scroll down to the 'Manage this Plan' section to suspend your automation.

• Related Articles

• How do I manually control my Inverter?

  When you've added your inverter and selected your plan, you'll be able to open the controls for your inverter. You can set the following: 1. Power on/off, 2. Set inverter output 3. Reset, i.e. remove any active controls/commands. Setting the ...

• How does the 'Voltello Battery' plan work?

  When you configure your schedules in the Voltello Battery preferences, your plan will run every 5 minutes and automate your charge and discharge based on your scheduled blocks & settings: What are the settings in the Voltello Battery plan? If there ...

• How do I add my Battery in the Voltello App?

  To add your battery, tap the "+ New Device" button in the Voltello App. You'll then be able to follow the instructions to configure your battery. After you've added a battery, you can set up your battery automation. Take a look at the document ...

• What are the different Battery modes?

  When controlling your battery, you can set one of four modes: Charge Charges your battery from solar if available, or from the grid. Discharge Force discharge your battery. Self consumption mode (SCM) Setting 'Self Consumption mode' hands over the ...

• Is Voltello compatible with my existing battery?

  Most batteries are configured to charge when there is surplus solar, i.e. when energy is being exported to the grid. When the Voltello link device activates export control (when we limit exports) we maintain a small level of exports (0.05 kW) to ...