How do the Voltello App & LinkPro/LinkZB work to control my solar setup?

Your Voltello app and the Link device (LinkPro or LinkZB) communicate via our cloud, which means that once you've connected them, you can control from anywhere via the Voltello App. The Link device communicates directly with your solar devices, like your inverter, meter and battery, and then passes this information to the Voltello system so that automated controls can be applied. 

Take a look below at a simplified diagram of how your controls from the Voltello app are sent through to your inverter & other solar devices.

• Related Articles

• How do I connect my LinkPro to my solar inverter?

  The LinkPro communicates with your solar inverter using Wi-Fi. In order to set up this communication, you need to pair the LinkPro device with your Wi-Fi, it can then start sending messages and curtailing. The LinkPro can be paired with your Wi-Fi in ...

• What do different coloured LED lights mean on my LinkZB / LinkPro?

  The LinkZB and LinkPro devices have LED lights which blinks different colour combinations depending on the status of the WiFi connection and Bluetooth pairing mode. Please see below for more information on what the combinations of colours indicate. ...

• How do I get started in the Voltello App?

  1. Open the App, create your account and add your Address & NMI. You’ll need your NMI if you are planning on registering your site for Flexible Exports / Emergency Backstop. Your NMI is used to find your Utility and show you the correct plan. How do ...

• Solar for NTPWC Setup - Step-by-Step Guide

  The Provisioning process requires the Household/Site Customer and the Installer to complete a series of steps using the Voltello Link device and the Voltello app. Links to the Customer Step-by-Step Guide and the Installer Quick Installation Guide are ...

• What are the settings in Solar for Amber?

  When you set up your Solar for Amber plan, you can configure different settings for your automation. After you have set up your plan, you can change these settings at any time: How do I change my Plan settings? You'll need to add your inverter(s) to ...