The Battery for Localvolts Automation uses your Localvolts price to control the behaviour of your battery. You can adjust settings based on prices, schedule other control periods, and set other behaviours like charging, discharging, Self Consumption mode and Idle mode. Your battery will then be automated based on your settings, giving you savings when power is cheap, and avoiding charges when your Sell Price (Feed in tariff) is negative.
The Battery for Localvolts automation executes every 5 minutes and performs the following steps:
Step 1: Call the Localvolts API for your current price
We use the Localvolts API & your NMI to retrieve your buy and sell (FiT) price.
Step 2: Determine the battery mode for the next 5 minutes
Using your preferences (or default preferences) determine the battery mode for the next 5 minutes.
2a) Start Charging if your Buy Price is below the Maximum Charge Price.
2b) Start Discharging if your Sell Price is above the Minimum Discharge Price and SOC is above the Discharge Threshold.
2c) Hold if my Buy Price is below the Maximum Hold Price and SOC is above the Hold Threshold. This puts the battery into 'idle' mode and is intended to have room for charging the battery with very low Buy Prices.
2d) The default battery mode SCM is set if the above steps didn't meet any criteria.
The steps 2a to 2d are evaluated in sequence and if a step meets the criteria to set a battery mode then the remaining steps are skipped. For example, if step 2a determines that the battery mode should be set to 'Charge' the steps 2b to 2d are not evaluated. If enabled, the 'Advanced Settings' are also considered in the steps 2a, 2b, and 2c.
Step 3: Set the Battery Mode
The Voltello LinkPro (or LinkZB) device communicates with the battery to set the battery mode as determined in step 2.
Step 4: Wait 5 minutes
Wait 5 minutes and continue with step 1 as long as the Battery for Localvolts automation is active (and not suspended).
Related Articles
How does the Battery for Amber automation work?
The Battery for Amber Automation uses your Amber Price to control the behaviour of your battery. You can adjust settings based on prices, schedule other control periods, and set other behaviours like charging, discharging, Self Consumption mode and ...
What are the 'Battery Schedule' settings in Battery for Localvolts?
As well as using your Localvolts Price to control your battery, you can set schedules for charging and discharging too. You can use the Schedule feature with or without the Advanced settings. When you set a schedule, it will override your Localvolts ...
How does 'Solar for Localvolts' actually work?
The Solar for Localvolts Automation uses your Localvolts price to control the behaviour of your inverter(s). You can adjust settings based on prices, schedule other control periods, and set when and how much power to produce. You can control how you ...
How do I set up Battery for Localvolts to use my Localvolts price?
For Village Energy & our Voltello devices to control your battery with your Localvolts price, you will need to: Add your NMI in the Voltello app, and Enable your Localvolts data feed to Village Energy. Existing Localvolts Customers If you are an ...
How does the 'Voltello Battery' plan work?
When you configure your schedules in the Voltello Battery preferences, your plan will run every 5 minutes and automate your charge and discharge based on your scheduled blocks & settings: What are the settings in the Voltello Battery plan? If there ...