Is my solar inverter compatible with Voltello devices like LinkZB or LinkPro?
The LinkPro supports Fronius, Huawei, Sungrow, SMA, iStore and FIMER inverters that have:
1. Internet capability (via Ethernet or WiFi) and,
2. Modbus-TCP communication ability.
The LinkPro can integrate with multiple inverters at one property, e.g. a home with two Fronius inverters, or a home with a mix of any of the supported brands like a Fronius and an SMA.
The following makes and models are compatible (note - we will be adding FIMER specifications soon):
Brand | Inverter Model Number(s) |
Fronius | Fronius Eco Fronius Tauro
Fronius Symo / Symo Hybrid / Symo GEN24
Fronius Primo / Primo UL / Primo GEN24 |
Huawei | SUN-2000-nnKTL-nn*
SUN8000-500KTL
*Please check the attached model list for your inverter, or check your inverter specifications for WiFi dongle compatibility. Please note that Huawei inverters require a Huawei WiFi Smart Dongle which may need to be purchased and installed separately. Your inverter is only compatible with the WiFi Smart Dongle if it has a USB Port. We do not support Huawei inverters that have a RS485 Communication Cable instead of the WiFi Smart Dongle. Huawei cascaded inverter setups are NOT compatible with the LinkPro or LinkZB. |
SMA | SB nn00TL-21 SBn.n-1AV-40
SBn.n-1AV-41
SBn.n-1VL-40
STP nn000TL-10 STP nn000TL-20
STP nn000TL-30
STP50-nn-40 STPn.n-3AV-40 SMA inverters should have a compatible "Speedwire Data Module" installed. Please note SMA Sunnyboy SB 4000 TL-21 does not have WiFi capability and for that reason NOT COMPATIBLE with the Village Energy LinkZB or LinkPro. |
Sungrow | SGn.n (RS, RS-S, RS-JP, RA-ADA, RT, etc...)
SGnn (RS, RS-S, RS-JP, RA-ADA, RT, KJ, KSG, CX-JP, KU-M, BF, HV, CX, etc...)
Only Sungrow models that support MODBUS, or that are compatible with the WiNet dongle, are supported.
Please note: SG5K-D is not compatible with Modbus and for that reason NOT COMPATIBLE with the Village Energy LinkZB or LinkPro. Please note: Unfortunately Sungrow Hybrid inverters are not currently supported. Integration of SH inverters is in development and we hope to be able to add these models to our list of compatible inverters very soon. |
iStore | IS-INV-29900-3PH
IS-INV-40000-3PH IS-HYB-5000-[1PH or 3PH] IS-HYB-6000-[1PH or 3PH] IS-HYB-10000-[1PH or 3PH] IS-HYB-15000-3PH IS-HYB-25000-3PH
iStore cascaded inverter setups are NOT compatible with the LinkPro or LinkZB. |
FIMER
| Specifications will be added soon. For confirmation please contact us at support@villageenergy.zohodesk.com
|
Our developers are working on expanding this list of supported inverters.
Related Articles
How do I connect my LinkPro to my solar inverter?
The LinkPro communicates with your solar inverter using Wi-Fi. In order to set up this communication, you need to pair the LinkPro device with your Wi-Fi, it can then start sending messages and curtailing. The LinkPro can be paired with your Wi-Fi in ...
What do different coloured LED lights mean on my LinkZB / LinkPro?
The LinkZB and LinkPro devices have LED lights which blinks different colour combinations depending on the status of the WiFi connection and Bluetooth pairing mode. Please see below for more information on what the combinations of colours indicate. ...
How do I find my inverter IP address?
The process for manually finding your solar inverter IP address depends on the make. Use the links below to see how to do this for your solar brand: Fronius - https://youtu.be/jHjE2tK08ok SMA - https://youtu.be/P1Tpz8TB2eo (see 3 minute mark for IP ...
How do I find the Service/Admin Password for my Fronius Inverter?
If you are attempting to update any settings in your Fronius inverter and are required to enter a Service or Admin Password, please reach out to us at support@villageenergy.zohodesk.com so that we can assist. Please quote your inverter model and ...
How do I connect the LinkZB/Pro and AirFlex/Sensibo devices for the ‘Surplus Solar for Comfort’ plan?
The LinkZB/Pro connects to your rooftop solar inverter via Wi-Fi or Ethernet using Modbus communication. The AirFlex Smart Thermostat is set up using the Linkit+ app, which is then connected to your Voltello app account. You can also use Sensibo ...