I have replaced my inverter, how do I remove my old inverter and add the new one?
First, add your new device with the "New Device" button in the Home tab.
Once you've added your new inverter, open your plan's page from the Connections tab, and tap 'Use another Device'.
Choose 'Select an existing device', and select your new inverter. Your plan and settings will be moved to the new inverter you select.
Please remember to enable MODBUS on your new inverter before attempting the steps above.
Modbus is enabled on all Sungrow inverters by default.
Related Articles
How do I enable Modbus on my Solis inverter?
The models S6-EH1P(3-6)K-L-AU, S6-EH1P(3-8)K-L-PLUS-AU, and S6-EH3P(5-10)K-H-AU ship with the "S2-WL-ST" logger. Other Solis inverters require an S2-WL-ST logger for Modbus-TCP communication. Your installer would likely have already set up your ...My inverter(s) are showing as 'OFF', or my device is offline.
How do I check my device status? Enable notifications from the Voltello App. If your device is offline, you will receive a notification. Check the lights on your Voltello device. The LinkZB/LinkPro has a green and blue light. When connected and ...How do I manually control my Inverter?
When you've added your inverter and selected your plan, you'll be able to open the controls for your inverter. You can set the following: 1. Power on/off, 2. Set inverter output 3. Reset, i.e. remove any active controls/commands. Setting the ...How do I find my inverter IP address?
The process for manually finding your solar inverter IP address depends on the make. Use the links below to see how to do this for your solar brand: Fronius - https://youtu.be/jHjE2tK08ok SMA - https://youtu.be/P1Tpz8TB2eo (see 3 minute mark for IP ...How do I enable Modbus TCP on my Fronius Inverter?
For GEN24 Inverters, please see: How do I enable Modbus on my Fronius GEN24? How-To Video: Connecting to the Fronius SnapINverter (Datamanager) user interface You will need to complete these steps for each inverter if you have multiple. 1. Connect to ...