Solar for NTPWC Setup - Step-by-Step Guide

Solar for NTPWC Setup - Step-by-Step Guide

The Provisioning process requires the Household/Site Customer and the Installer to complete a series of steps using the Voltello Link device and the Voltello app. 

Links to the Customer Step-by-Step Guide and the Installer Quick Installation Guide are below: 

Additional Articles:

Installers can submit a ticket here and select "I am an installer" if you are on-site, for priority responses.

If you have any other questions contact the Village Energy Support Desk using your Voltello app. Simply select 'Menu' and 'Support'. 


    • Related Articles

    • How do I get started in the Voltello App?

      1. Open the App, create your account and add your Address & NMI. You’ll need your NMI if you are planning on registering your site for Flexible Exports / Emergency Backstop. Your NMI is used to find your Utility and show you the correct plan. How do ...

    • How to install your Voltello AirFlex - A step-by-step guide

      Thank you for purchasing the Voltello AirFlex. Use the attached step-by-step guide for instructions on how to install your Voltello AirFlex. It’s easy to get started… You’ll need two apps. Start by downloading both apps to you phone using the QR ...

    • What are the settings in Solar for Amber?

      When you set up your Solar for Amber plan, you can configure different settings for your automation. After you have set up your plan, you can change these settings at any time: How do I change my Plan settings? You'll need to add your inverter(s) to ...

    • My Link Device isn't connecting to WiFi/Bluetooth during setup.

      If your device is stuck on a connection page while onboarding, please check the following: Make sure you're connecting to a 2.4GHz network. Make sure you're NOT connected to a guest network. Guest networks often prevent devices from talking to each ...

    • How do I set my rooftop solar up to communicate?

      This may come as a surprise to most people, but energy utilities don't have real-time information about their customers' rooftop solar. When someone adds solar to their home or business, all the utility can see is that the customer's electricity ...